1.       Hoisting

Standard hanger can be used to indoor bearing reinforced concrete roof, the length of the hanger rod depends on circumstance. The girder which is decorated with steel tube is fixed by hoisting cable.

Hoisting structure

2.       General hanging

This structure is applicable to single cabinet display, the weight of it should be less than 50kg, so it can be hanged on the wall directly. No need to save space for maintenance, because the cabinet can be opened from the front, as shown below,

3.       Bracket hanging

This kind of installation is used to outdoor display, in consideration of the difficulty for maintenance, the steel bracket structure is installed between the display and the wall, the distance is around 800mm. And the auxiliary equipments is placed between them.

4.       Mosaic strucure

The display is embeded in the wall, so it’s needed to dig a hole through the wall, which has the same size as the display. And in this way, it’s very convenient for maintenance and elimination of heat.

5.       Floor type structure

Floor type structure can be used to indoor display and outdoor display. It’s needed to make a bracket which has a same height as the display, and the bracket is decorated with materials which match the surroundings, the display is proped upon it.